XD42GA755 24V DC Gear Motor Eccentric Output Shaft Sport Control Small Low Speed CW CCW Permanent Magnet + Bracket (500rpm/min)
Availability: Pre-Order, Inquiry Price
About this product
*[Product Features] The DC gear motor adopts all-metal gears, which is small in size, large in torque, ultra-quiet, stable in operation, and very practical.
*[High Torque of the Motor] The stator and rotor of the DC geared motor adopt pure copper coils to increase the torque of the motor and enhance the anti-deceleration and electrical conductivity.
*[Motor Protection}] This brushless motor will automatically cut off the power when the current reaches 3A to prevent the motor from burning out during use and increase the service life of the motor.
*[Motor Lubricant] The motor gear lubricating oil of the DC reduction motor is high-temperature grease, with low friction, noise reduction and slow temperature rise.
*[Magnet Features] The motor body of the DC geared motor has two magnets, which have the characteristics of high remanence, high coercivity, high energy product, high performance, and high torque.
Description
Specification:
Item Type: DC Gear Motor
Model: XD-42GA755
Material: Copper
Output Shaft Size: Approx. 8 x 20mm / 0.3 x 0.8in
Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20M?
Insulation Withstand Voltage: After the rated operation of the motor under normal temperature and humidity, 50Hz or 60Hz is applied between the coil shells for one minute, and the abnormality is 1500V.
Temperature Rise: It is normal to install a gear box or equivalent heat sink and conduct rated operation under normal temperature and humidity by using the resistance method to measure the temperature rise of the coil below 70
Insulation Class: Class B(130)
Operating Environment Temperature: Motor: -10~+40 (no icing)
Use Environment Humidity: 85% or less (no condensation)
CW/CCW: Yes
Speed Adjusted: Yes
Model VoltageDC/V No-Load Speed (rpm/min) No-Load Current(A) Load Speed (rpm/min) Loading Momentkgf·cm Reduction Ratio1:00 PowerW XD-42GA755 24V 100 0.27 93 4.58 50 25 150 0.27 128 3.06 33 25 200 0.27 175 2.29 25 25 300 0.27 245 1.53 16.6 25 500 0.27 435 0.92 10 25 600 0.27 535 0.76 8.3 25Â
Package List:
1 x DC Gear Motor
1 x Bracket
Related Products
