HVAC Blower Motor Assembly 700160 88973567 PM9243 Blower Motor with Fan Cage for 2003-2008 Pontiac Vibe
Availability: Pre-Order, Inquiry Price
About this product
*★★ FITMENT: 2003-2008 Pontiac Vibe
*★★ REPLACE OEM: 700160, 88973567, PM9243, GM3127105, 3508015-80547, BM 9243C, 2400-287276
*★★ FUNCTION: HVAC Blower Motor with Fan is responsible for producing air that goes through the vents of your vehicles AC and heating system. If your AC does not produce or circulate any cooled air then you may have a problem with your blower motor.
*★★ HIGH QUALITY: Every Blower Motor must take inspected and tested multiple times before the shipment,Our Blower Motor Model with strong heat dissipation,reduce the rate of burning electronic parts
Description
FITMENT:
* 2003-2008 Pontiac Vibe HVAC Blower Motor Assembly
Replaces Part Numbers:
* 700160
* 88973567
* PM9243
* GM3127105
* 3508015-80547
* BM9243C
* 2400-287276
How to replace with new HVAC blower motor?
* 1 Always wear eye protection and start with installation tools.
* 2 Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. (Note: On older vehicles, the blower motor may be * located in the
engine compartment on the passenger side firewall.)
* 3 Disconnect the blower motor electrical connector.
* 4 Remove the retaining screws to the blower motor assembly.
* 5 Remove the box and blower motor assembly.
* 6 Remove the blower motor retaining screws. Remove the motor from the box.
* 7 Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly.
* 8 Connect the blower motor electrical connector.
* 9 Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air.
* 10 Searching related installation video on the internet will be also recommended.
Related Products
