PowMr 1500W Solar Inverter 12V to 230V, Pure Sine Wave Power Inverter Bulit in 80A MPPT Controller, Max.PV 2000W 450V Input, fit for 12V Lead-Acid/Lithium Battery

Configurable input voltage range for home appliances and personal computers via LCD settingConfigurable battery charging current based on applications via LCD settingConfigurable AC/Solar Charger Priority via LCD settingCompatible to mains voltage or generator powerBattery charging mode and load working mode can be setAuto restart while AC is recoveringOverload/ Over temperature/ short circuit protectionSmart battery charger design for optimized battery performanceCold start functionFit for 12V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery (Need to be set via the “User-Defined”).Can I use this AC power to charge my batteries?This Power inverter is able to charge the battery bank when AC power is connected to the inverter.Can I use the inverter with a 48V system?No. This inverter can only work with 12V battery system.Can this inverter work with Li batteries?Yes, Need to be set via the “User-Defined” and the lithium battery is rated for 12V applications.Can utility charging and inverter output run run at the same time?Yes. The utility charging circuit (AC-DC) and inverter output circuit (DC-AC)are independent. The inverter output can be used while the utility is charging, in this case, it can avoid the impact on the load because of the unstable utility voltage.Can it be connected in parallel? and can this be used without batteries?No, it does not support parallel. The inverter must have a battery, and the battery must be connected firstHow many watt panels does this inverter support? I can put a total of 1600 watts on the panel?Yes, it can handle up to 2000W solar panels. Note: This is a wide voltage version of the inverter, the solar starting voltage needs to be above 130V, so it is recommended that all solar panels are connected in seriesSolar first?Solar energy provides power to the loads as first priority.Utility first (default)?Utility will provide power to the loads as first priority.SBU priority?Solar energy provides power to the loads as first priority.This is a wide voltage Hybrid inverter, The voltage that starts to connect to the solar panel must be above 150V for the Hybrid inverter to work normally. Single phase 220V AC (A Hot Leg)In the mains bypass mode, the device cannot be connected to two-phase 220V AC power, that is, L1-L2 cannot be connected to L-N.In inverter mode, after the device is connected to two-phase 220V, please do not select the mains priority as the output priority, so as to avoid potential safety hazards for the device.Do not connect the AC output end of the device to an autotransformer, so as not to affect the normal service life of the device.What kind of the inverter is suitable for your appliances?Pls know that load is divided into resistive load and inductive load .If you need the inverter to run the resistive load (like laptop, TV, electric cooker ), please choose the inverter with continuous power higher than the appliances rated power. And it is best to use 80% of the rated power. If you use microwaves,water pumps, air conditioners and other appliances with motors or compressors ,please choose the inverter whose continuous power is 3-10 times higher than your appliances.