DIGITEN WTC200 Wireless Temperature Controller Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe Heating Cooling Mode for Fan Heater Greenhouse Homebrewing Reptile

The wireless thermostat will automatically turn on/off heating or cooling devices through your preset target temperature. Control Cooling and Heating device, Monitor room temperature.

The wireless thermostat will automatically turn on/off heating or cooling devices through your preset target temperature. Control Cooling and Heating device, Monitor room temperature. The wireless thermostat will automatically turn on/off heating or cooling devices through your preset target temperature. Control Cooling and Heating device, Monitor room temperature.

Specifications

Specifications

Note, Multiple sets of equipment will not interfere with each other. if you want one remote to work only one outlet, when pairing, please remove the batteries of other remotes and keep only one remote control is in active (power on) state.

Note, Multiple sets of equipment will not interfere with each other. if you want one remote to work only one outlet, when pairing, please remove the batteries of other remotes and keep only one remote control is in active (power on) state.

Load Capacity: 100-240VAC 12A, 1300W@110VAC, 2640W@220VACRemote Batteries Required: 2×1.5V AAA (Not Included)Transmission Distance: 50-100mMeasuring Temperature Range: -10?~80?, 14?~176?Temperature Accuracy: ±0.1?/?High/Low Temperature Alarm: 0?~80?/32?~176?Remote Refresh Frequency: 20 SecondsTemperature Probe: Plug In The ReceiverDirectly connect to cooling or heating device after setting.Set Run?Stop, it will be in cooling mode.Set Run?Stop, it will be in heating mode.Temperature is detected by the receiver.Can be monitored and contorlled in different rooms with 50-100m.The Low alarm and High alarm are not equal to the Run temperature and Stop temperature.The High alarm and Low alarm are turned off by default.To turn on the alarms, long press and hold the SET button, then press the DOWN/UP button to set the High/Low alarm velue you desire on the High/Low page.2m/6ft probe cable.The NTC probe is waterproof.Place the probe where the temperature needs to be detected.