Anbull 1.5HP 6480GPH Pool Pump, Powerful Self Priming Dual Voltage in/Above Ground Swimming Pool Pump with Strainer Basket (1100W/60HZ)

IPX5Class FSilent operationConcise designNice performanceOverload protectionSingle or three phaseAnodized motor bodyArrange drain device of water pump.Can resist chemical in swimming poolHuge pro-filter for less cleaning maintement Heighten pump base to keep water pump off Water or moist working environment.1 × 1100W/1.5HP Swimming Pool Pump2 × O-shaped Sealing Washers2 × Short Water Pipe Joints (black and white)2 × Long Water Pipe Joints1 × ManualModel:HBP1100IIPower:1100W/1.5HPVoltage:110-120V/220-240VFrequency:60HZCurrent:10.8/5.4 AmpsQ.MAX(Flow):108GPM/410l/minH.MAX:155mm/6.1inchInner/outer joints size: 1-1/2"NPT G2-1/4"1. Made of reinforced thermoplastics, with anti-corrosion properties, ensuring strength and durability.High efficiency and low noise.Pure stainless steel motor, lower operating temperature and longer service life.The large detachable filter basket is easy to clean; the transparent cover can see the inside.Built-in thermal overload protection device can prevent overheating and damage to ensure safety.Wide range of applications-internal thread and sliding sleeve joint connection, tool-free installation.2PCS: Inlet/Outlet (Short) connector size: 48.5mm, connected to 1 1/2 PVC.2PCS: Inlet/Outlet (Long) connector Size: 1-1/2"NPT, [G2-1/4"(Pipe thread size)], connected to hose.Filter the impurities (hair, leaves, etc.) in the water and collect them together to better deal. At the same time, it also prevents debris from entering the swimming pool pump body and avoid causing damage to the swimming pool pump bearings, impellers, etc.The size and volume of the filter basket are: Diameter: 146mm/5.74; Height: 190mm/7.48; Volume: 3.2L/0.84galOpen this transparent cover, press the left (110-120V) or right (220V) button to select your desired voltage.The green terminal wire is Earth wire, the swimming pool pump can be grounded when it is working, ?Anti-leakage?to prevent people from being shocked when they touch electrical appliances, play a protective role.Utilize the negative pressure (vacuum) formed when the above ground pool pump is working, it will press the water lower than the suction port into the water inlet, and then discharges it from the drain end of the swimming pool pump.Inlet/Outlet with Internal and external threads, match with long/short joints to using, can quickly find and install suitable hoses/pipes, to improve work efficiency.Adding an O-shaped sealing ring between the filter basket and the filter pipe can effectively strengthen the sealing of the filter port and reduce the water leakage problem of the filter port during operation.Unique filter basket design, it can effectively filter impurities in water.( Such as: hair, pebbles, branches, leaves, etc.)It not only can effectively seal the filter port to prevent water leakage, but also can observe the filtering situation inside the filter tube through the transparent cover anytime and anywhere. Convenient and simple, saving working time and effort.After using, the excess water can be drained through here; after draining, the drain plug can be used to seal the drain, so as to better store the in/above ground swimming pool pump and prolong the service life of the swimming pool pump.Clean strainer basket regularly. Do NOT strike basket to clean. Inspect strainer cover gasket regularly and replace as necessary.The in/above ground pool pump have self-lubricating motor bearings and shaft seals. No lubrication is necessary.Keep motor clean. Insure air vents are free from obstruction to avoid damage. Do NOT use water to hose off motor.Occasionally, shaft seals must be replaced, due to wear or damage. Replace with genuine seal assembly kit.When not in use, please place the swimming pool pump in a well-ventilated dry area.The swimming pool pump are only suitable for counter-clockwise rotation when viewing from the swimming pool pump end.Before disconnecting electric connections, shut off electricity at its source.