Obaee Front Left Driver Side Power Window Lift Regulator & Motor Assembly Compatible with Chevy Impala 2006-2013 & Chevrolet Impala Limited 2014-2015 Replace OE 10338555, 748-172
About this product
*Compatible with 2006-2011 Chevy Impala V6 3.5L Sedan
*Compatible with 2012-2013 Chevy Impala V6 3.6L Sedan
*Compatible with 2006-2011 Chevy Impala V6 3.9L Sedan
*Compatible with 2006-2009 Chevy Impala V8 5.3L Sedan
*Compatible with 2014-2016 Chevy Impala Limited V6 3.6L Sedan
Description
Compatible with 2006-2011 Chevy Impala V6 3.5L SedanCompatible with 2012-2013 Chevy Impala V6 3.6L SedanCompatible with 2006-2011 Chevy Impala V6 3.9L SedanCompatible with 2006-2009 Chevy Impala V8 5.3L SedanCompatible with 2014-2016 Chevy Impala Limited V6 3.6L SedanPower/Manual: Electric Power Window RegulatorConnector: 2 PinsMotor Included: YesDesign: One Sliding BarAttachment Type: Bolt OnMaterial: ABS Plastic and MetalInstall Location: Front Left (Front Driver Side)Reference OE Number: 748-172, 10338555, 22894021, 25890045Quantity Sold: One PieceBold high-quality steel wire: thick steel cable, strong, durable and wear-resistant, not easy to derail or break.High-quality motor: high-quality enameled wire pure copper motor, large torque, high performance, stable lifting.High-quality guide rail materials: selected high-quality galvanized sheets, produced through several stamping processes and advanced electric welding processes, with high strength, durability, and resistance to deformation.When wiring, pay attention to the polarity of each wiring harness, and is equipped with a dedicated electric window regulator switch.When installing, each link fastener should be fastened and reliable, and washers should be added. The grooves of the guide rails should be kept clean, lubricated, and free of dust layers to prevent them from being seized into the motor during operation in the future.At the same time, the front, rear, left and right electric glass lifters have their own directionality, and they cannot be mixed during installation.During regular maintenance of the electric lifter, all moving parts of the motor should be cleaned. The shaft sleeve of the transmission part should be filled or replaced with lubricating grease. The wear marks and carbon deposits on the surface of the motor steering gear should be sanded with No. 00 sandpaper. Diamond gauze should not be used.