DC 12/24V Brushless Worm Motor Speed Reduction Gear Motor for Robots Locks DIY, Gear Motor 4~150Rpm (12V 23RPM)

When you use the motor, there should be no restraints. For example, the adhesive should not flow into the bearing through the rotating shaft, which will affect the operation of the motor.Do not overload or hang items that affect rotation at the end of the shaftDo not store or operate in the surrounding high temperature or extreme humidity, which will reduce the effect of the motorWhen the positive and negative motor terminals of the power supply need to be soldered, the soldering iron temperature is 340?±40?, and the heating time is within 3 seconds. The plastic should not be deformed. During work, let the soldering point flow into the motor or break the wire. Will cause the motor function to declineDo not let the motor shaft get stuck. When power is supplied, the motor will overheat in a short time and its accessories will be burned.Supply the specified power and be sure that it is within the range of measurable requirementsThe installation of pulleys or gears, do not aggravate abnormally when pressing inWhen installing the motor, if the screw is too long, it will cause contact between the motor itself and the drill, which will affect the characteristics