HVAC Blower Motor with Fan Cage - Replaces 79310-S84-A01, 700002, 79310S3VA01, 15-80955 615-58456, 79310S84A01 Fit For 2001-2006 Acura MDX | 1998-2002 Accord | 1999-2004 Odyssey

When you turn up the AC/heat in your truck and see no change in the amount of air coming from the vents you likely need to replace your blower motor.

The blower motor is designed to produce more air as you turn up the knob on your AC system. However, when the blower motor fails the motor is no longer able to blow on high.

Once you have changed the factory blower motor that has failed on your truck you'll be able to control your AC/heat again.


OE Part Number :

79310-S84-A01
700002
79310S84A01
79310S3VA01
79310-S84-A01
15-80955
615-58456

Fitment Of The Heater Blower Motor :

2001-2006 Acura MDX
1998-2002 Accord
1999-2004 Odyssey
2003-2008 Pilot


How to replace?

1) Locate the blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. And disconnect the blower motor electrical connector

(Note: On older vehicles, the blower motor may be located in the engine compartment on the passenger side firewall).

2) Remove the retaining screws to the blower motor assembly.

3) Remove the blower motor retaining screws. Remove the motor from the box.

4) Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly.

5) Connect the blower motor electrical connector.

6) Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air.

7) Searching related installation video on the internet will be also recommended.