Arduino Compatible Robot Chassis:✨ Comes with Optical Wheel Encoders/Speed Sensors ✨ for Any Small DIY Robot Project. Great Platform / Chassis for Arduino, Raspberry Pi, 2WD Acrylic Chassis
About this product
*✅ This diy robot chassis not only comes with the slotted wheel encoder disks, but is complete with two optical encoder / speed sensor modules to provide distance, speed, and acceleration to your controller
*✅ This arduino robot chassis uses two strong 1:120 gear-ratio 6v DC motors. They have enough torque to propel a decent amount of hardware and sensors.
*✅ Our Acrylic Robot Chassis Can be used with any existing microcontroller, such as Arduino UNO, Raspberry Pi, ESP32, RP2040, etc.. to create your own DIY robot.
*✅ There are Many predrilled mounting holes in this Robot chassis to accommodate sensors and control boards.
*✅ Battery holder is included to hold four AA sized batteries, as well as a toggle switch for power.
Description
This is the perfect DIY Robot Chassis if you are making a light weight robot.  Can be used with any micro-controller board even ? Arduino, ? Raspberry pi, ? RaspberryPi PICO, ? ESP32, or ? Beagleboard. ?  We have include the two Optical Wheel encoders required to determine speed, acceleration, and position in this kit so you don't have to go source them later. Do you want to explore the field of robotics and autonomous robot experimentation, but don't know where to start?  This 2-wheeled robot chassis is created just for you.  Our 2-wheeled acrylic robot chassis is a platform for learning robotics, micro-controller programming, electronics and sensor integration.  The robot kit contains all the components required to build a small, high performance robot platform in no time.  The main body of the chassis is made of two layer Laser-Cut Clear-Acrylic sheet and holds a dual shaft gear motors on either side, with a rotating caster wheel for smooth gliding. Each dual shaft motor has one side holding the wheel while the other is connected to an included encoded disk.  The chassis has enough holes and openings for mounting batteries, sensors, Motor Drivers, and microcontroller modules.  This kit can be used to build a robot for distance sensing, Obstacle Avoidance, Line follower, Wireless remote controlled Car, Autonomous robot and any other creative works you can think of.  This Acrylic 2WD Robot chassis comes with: One clear acrylic base plate (protective paper covering can be removed) two 6v 1:120 ratio DC gear motors two plastic slotted speed encoder disks two optical encoders to determinedistance/velocity/acceleration  one pivoting caster wheel  one 4 cell AA battery holder  one SPST switch
Related Products
