AITIAO 6Pcs DC 3-5V Micro Submersible Low Noise Mini Water Pump with 2pcs Clear Vinyl Tubing Flexible PVC Water Pipe(1M) Micro Motor Water Pump for Fish Tank Pond Fountain Hydroponics Garden Aquariums

Mini Submersible Water Pump:

Material: Engineering Plastic

Voltage Range: DC 3-5 V

Load rated current: 0.18A

Maximum lift:40-110cm / 15.75"-43.4"

Flow rate:80-120L/H

No load of water discharge capacity: 100L/H

Driving mode: Brushless DC Design, Magnetic Driving

Outside diameter of water outlet: 0.29"/7.5mm

Inside diameter of water outlet: 0.17"/4.5mm

Water inlet diameter: 0.19"/5mm

Continuous working life: ? 200 hours (not recommended for continuous use.)

Water Pipe:

Material: PVC

I.D. Size: 0.22"/5.54mm

O.D. Size: 0.32"/8.20mm

Length: 3.28ft/1M

Package Included:

6 x DC 3V 5V Mini Water Pump

2 x 1M Water Pipe

Note:

1. The pump is a DC pump, 3V pump with DC3-4.5V power supply (CAN NOT be used directly with 220V AC voltage); It is recommended to use 3-5V as power source, battery, power bank, USB cable, mobile phone charger, etc.

2. Only suitable for experiments, not recommended for continuous use.Do not run without water for a long time.

3. When diving the water pump into the water, the water level is higher than the pump.The low level of the water will cause the temperature too high, so the noise of the pump will be large.

4. Land use need to allow water to flow into the pump (non self priming pump), the installation of water level higher than the pump.

5. To keep the water clean, so as not to block the pump rotor. the pump should be cleaned regularly to keep the pump clean.